Introduction of non-woven fabric production process

Editor:海宁市江雅纺织品有限公司 │ Release Time:2021-12-15 

In practical applications, there are many kinds of nonwoven fabric forming processes, and each forming process often has a variety of web consolidation methods. The combination of different web forming processes and different web consolidation methods produces A wide variety of non-woven products.


<1> Spunlace non-woven fabric


The spunlace process is to spray a high-pressure fine water stream onto one or more layers of fiber webs to entangle the fibers with each other, so that the fiber webs can be reinforced and have a certain strength.


<2>Heat-bonded non-woven fabric


Thermal bonding non-woven fabric refers to adding fibrous or powdery hot-melt bonding reinforcement material to the fiber web, and the fiber web is heated, melted and cooled to be consolidated into a cloth.


<3> Pulp air laid non-woven fabric


Airlaid non-woven fabrics can also be called dust-free paper and dry-laid non-woven fabrics. It uses air-laid technology to open the wood pulp fiberboard into a single fiber state, and then uses air-flow method to agglomerate the fibers on the web curtain, and then reinforce the fiber web into a cloth.


<4>Wet-laid non-woven fabric


The wet-laid non-woven fabric is to open the fiber raw materials placed in the water medium into single fibers, and at the same time mix different fiber raw materials to form a fiber suspension slurry, which is transported to the web forming mechanism, and the fibers are formed into a web in a wet state. Reinforce into cloth.


<5> Spunbond non-woven fabric


Spunbond non-woven fabrics are formed after the polymer has been extruded and stretched to form continuous filaments. The filaments are laid into a web, and the web is then bonded by itself, thermally bonded, chemically bonded or mechanically reinforced to make The web becomes a non-woven fabric.


<6>Meltblown non-woven fabric


The process of melt-blown non-woven fabric: polymer feeding --- melt extrusion --- fiber formation --- fiber cooling --- netting --- reinforcement into cloth.


<7> Needle punched non-woven fabric


Needle-punched non-woven fabrics are a kind of dry-laid non-woven fabrics. Needle-punched non-woven fabrics use the puncture effect of needles to reinforce the fluffy web into a fabric.


<8>Stitched non-woven fabric


Stitched non-woven fabric is a kind of dry-laid non-woven fabric. The stitching method uses the warp-knitted loop structure to couple fiber webs, yarn layers, non-woven materials (such as plastic sheets, plastic thin metal foils, etc.) or their combination The body is reinforced to make a non-woven fabric.


TOP